December 12, 2012 Press Release
PMI Model No.
is a switch bit attenuator that
operates over the frequency range of 500 MHz to 18 GHz. This model
provides 20 dB of attenuation when a TTL "0" is applied and less than
3 dB of insertion loss when TTL "1" is applied. This attenuator
switches between states in less than 100 nsec and maintains a maximum
VSWR of 2.0:1 into a 50 ohm impedance. ±5 VDC is required to power the
attenuator and it is supplied in a housing measuring 1.0" x 0.7" x
0.35". Other frequency ranges and attenuation values are available.
About Planar Monolithics Industries
Planar Monolithics provides its unique
products for applications in space, military, communications, telecommunications, commercial, and consumer electronics
systems. Planar Monolithics Industries, Inc. has been set up to manufacture and market various MIC/MMIC (Microwave
Integrated Circuits and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for
applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications, Defense (ECM, ECCM, ESM,
Radars, and Electronic Warfare), Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based Systems,
and Microwave Landing Systems. Contact
Planar Monolithics Industries Inc.
7311-F Grove Road
Maryland 21704, USA
Phone: (301) 662-5019
FAX: (301) 662-1731