December 3, 2012 Press Release
PMI Model No.
PE2-25-7G10G-5R0-20-SFF is a low-noise amplifier that operates over the
frequency range of 7.0 to 10.0 GHz. This model provides gain of 22 dB
minimum with a maximum noise figure of 5.0 dB. The output power at 1dB
gain compression is +20 dBm minimum and the output OIP3 is +27 dBm
minimum. This amplifier is supplied in our standard PE2 housing that can be
used with SMA connectors or as surface mount.
About Planar Monolithics Industries
Planar Monolithics provides its unique products for applications in space,
military, communications, telecommunications, commercial, and consumer electronics
systems. Planar Monolithics Industries, Inc. has been set up to manufacture
and market various MIC/MMIC (Microwave Integrated Circuits and Monolithics
Microwave Integrated Circuits) Components, Supercomponents, and Subsystems
for applications in Telecommunications, Terrestrial, Satellite, and Mobile-Radio
Communications, Defense (ECM, ECCM, ESM, Radars, and Electronic Warfare),
Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based
Systems, and Microwave Landing Systems.
Planar Monolithics Industries
7311-F Grove Road
Frederick, Maryland 21704, USA
Phone: (301) 662-5019
FAX: (301) 662-1731