November 24, 2012 Press Release
PMI Model No.
PE2-42-2G-2R0-15-SFF is a low-noise amplifier that operates over
the frequency range of 1.4 to 2.4 GHz. This model provides gain of
42 dB minimum with a typical noise figure of 1.8 dB. The output
power at 1 dB gain compression is +22 dBm typical and the output IP3
is +30 dBm typical. This amplifier is supplied in our standard PE2
housing that can be used with SMA connectors or as surface mount.
http://www.pmi-rf.com/Products/amplifiers/PE2-42-2G-2R0-15-SFF.htm
Quick Links: (click the links below for additional information)
Product Feature
Test Report
About Planar Monolithics Industries Planar Monolithics provides its unique products for
applications in space, military, communications, telecommunications, commercial, and consumer electronics systems.
Planar Monolithics Industries, Inc. has been set up to manufacture and market various MIC/MMIC (Microwave Integrated
Circuits and Monolithics Microwave Integrated Circuits) Components, Supercomponents, and Subsystems for applications
in Telecommunications, Terrestrial, Satellite, and Mobile-Radio Communications, Defense (ECM, ECCM, ESM, Radars, and
Electronic Warfare), Cable-TV, Navigation and Marine Electronics, FAA/DOT-Avionics, Ground Based Systems, and Microwave
Landing Systems.
Contact Planar Monolithics
Industries Inc. 7311-F Grove Road Frederick, Maryland 21704, USA Phone: (301) 662-5019 FAX:
(301) 662-1731 E-MAIL: sales@pmi-rf.com
Posted 11/25/2012
|