August 7, 2012 Press Release
-- High Linearity and Wide Bandwidth in a Compact 3 x 3 mm Package!
Chelmsford, MA
8/7/2012 - Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for
communication & military markets, has released a new Broadband High IP3 Downconverter RFIC which operates from 700
to 3500 MHz. The
HMC1090LP3E is ideal for
space constrained frequency conversion applications in wireless infrastructure equipment such as base transceiver
stations, remote radio units, small cells and repeaters.
The
HMC1090LP3E is a high
linearity downconverting mixer which is optimized for multi-standard diversity receiver applications where low
power consumption and small size are required. This highly integrated RFIC features a wideband limiting LO
amplifier and can be used in any 3GPP operating band from 700 to 3500 MHz. Unlike conventional narrow-band
downconverter RFICs, the
HMC1090LP3E supports both
high-side and low-side LO injection over the entire RF band.
The
HMC1090LP3E integrates LO
and IF amplifiers, LO and RF baluns and a wideband passive mixer core with bias control. The unique architecture
of this converter provides excellent LO/RF, LO/IF, and RF/IF isolations, while the RF and LO input ports are
internally matched to 50Ω. The HMC1090LP3E
exhibits noise figure as low as 8.5 dB and input IP3 up to +26 dBm making it ideal for demanding high linearity
applications. For narrow-band applications, the input IP3 performance of the
HMC1090LP3E can be
further optimized with simple external matching.
Consuming typically less than 0.9W of DC power, the
HMC1090LP3E, while a
very fast enable control interface, provides additional power conservation options in time division duplex (TDD)
applications.
The HMC1090LP3E is
housed in a compact RoHS compliant, 3 x 3 mm plastic QFN package. The unique converter is also available in dual
channel format as the HMC990LP4E.
Samples and evaluation PC boards for all SMT packaged products are available from stock and can be ordered via
the company's e-commerce site or via direct purchase order. Released data sheets may be found at
www.hittite.com.
About Hittite Microwave
Hittite Microwave Corporation is an innovative designer and manufacturer of high performance integrated
circuits, or ICs, modules, subsystems and instrumentation for technically demanding digital, RF, microwave and
millimeterwave applications covering DC to 110 GHz. The Company's standard and custom products apply analog,
digital and mixed-signal semiconductor technologies, which are used in a wide variety of wireless / wired
communication and sensor applications for Automotive, Broadband, Cellular Infrastructure, Fiber Optics &
Networking, Microwave & Millimeterwave Communications, Military, Test & Measurement, and Space markets. The
Company is headquartered in Chelmsford, Massachusetts.
Contact Beth McGreevy Mararketing Communications Manager
mcgreevy@hittite.com
Hittite Microwave Corporation 2 Elizabeth Dr. Chelmsford, MA 01824 978-250-3343, ext. 1117
978-250-3373 Fax
Posted 8/7/2012 |