August 23, 2012 Press Release
-- Industry Leading Analog-to-Digital Converters Now Available
-- New ADCs Target Extreme Applications
for Low Power
Consumption and Wide Bandwidth
Chelmsford, MA, 08/23/2012 -
Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military
markets, has introduced two new analog-to-digital converter (ADC) products which extend performance capabilities both
in ultra low power consumption and in ultra high bandwidth applications.
HMCAD1104 is a 10-bit octal
channel ADC which offers an industry best combination of low power and high performance. Operating at 65 MSPS, the
HMCAD1104 delivers a signal
to noise ratio (SNR) of 61.6 dB, while dissipating only 30 mW of power per channel. This performance level represents
a 50% improvement over the next closest competitor. The unique combination of low power consumption and compact 9
mm x 9 mm QFN SMT packaging, make the
HMCAD1104 ideally suited for
handheld and other portable instrumentation applications.
HMCAD1104 is pin compatible
with Hittite’s family of 12-bit ADCs including the
HMCAD1102, all of which are
compatible with the EasySuiteTM Test and Evaluation Tool for analysis and system configuration. Ease of use is further
enabled by various modes and configuration settings that can be applied to the
HMCAD1104 through the serial
control interface (SPI); these include channel specific power down, common mode driver strength, and coarse and fine
gain control. The HMCAD1104
is specified for operation over the industrial temperature range of –40°C to +85°C while the serial LVDS output is
designed to easily interface with FPGAs from several suppliers.
high performance applications which require sampling speeds to 26 GSPS, Hittite has also released the
HMCAD5831LP9BE 3-bit ADC.
This wideband ADC is targeted to extreme applications in radar, radio astronomy, and test and measurement equipment.
The combination of very wide input bandwidth up to 20 GHz, and a sampling rate up to 26 GSPS make this ADC unique
in the industry. These features enable quantization of high bandwidth signals up to 20 GHz with good INL and DNL performance.
The HMCAD5831LP9BE is
designed in a full flash architecture and provides Data XOR & Inhibit functions to ease FPGA programming. The
HMCAD5831LP9BE is housed
in a RoHS compliant 9 mm x 9 mm SMT package.
Samples and evaluation PC boards for all SMT packaged products
are available from stock and can be ordered via the company’s e-commerce site or via direct purchase order.
Released data sheets and s-parameter data (if truly available) are available on-line at
About Hittite Microwave
Hittite Microwave Corporation is an innovative designer and manufacturer of high performance integrated circuits,
or ICs, modules, subsystems and instrumentation for technically demanding digital, RF, microwave and millimeterwave
applications covering DC to 110 GHz. The Company's standard and custom products apply analog, digital and mixed-signal
semiconductor technologies, which are used in a wide variety of wireless / wired communication and sensor applications
for Automotive, Broadband, Cellular Infrastructure, Fiber Optics & Networking, Microwave & Millimeterwave
Communications, Military, Test & Measurement, and Space markets. The Company is headquartered in Chelmsford, Massachusetts.
Mararketing Communications Manager
Hittite Microwave Corporation
2 Elizabeth Dr.
Chelmsford, MA 01824
978-250-3343, ext. 1117