Whether you’re designing broadband defense systems,
HF, VHF, and UHF radios, or wireless systems that demand the lowest possible
IMD, Anatech has hundreds of standard power divider models to choose from.
The two models below are terrific examples of our design expertise at
work and many more are available at http://www.amcrf.com/.
We can also design custom models up to 32 GHz with high power handling ability
and up to 32 ports. Please contact us with your requirements at (973) 772-4242
or by e-mail at
3-way Power Divider for HF and VHF Systems
AM100PD1083 is a three-way power divider that operates from 1 to 200 MHz
and has isolation of 20 dB, insertion loss of less than 0.5 dB, and maximum
VSWR of 1.3:1. Amplitude balance is better than 0.2 dB and phase balance is
2 deg. The power divider is available with SMA female, TNC female, or Type-N
female connectors, measures 1.25 x 1.25 x 0.75 in., and has an operating temperature
range of -40o to +60o C. This product is available on our E-store, AMCrf.com.
800 to 2500 MHz, 150 W, Low IMD 4-Way Power Divider
The AM1650PD873 is
a broadband four-way power divider that operates from 800 to 2500 MHz and
handles 300 W CW. Its low IMD of -150 dBc or better makes it well suited for
wireless base station and other applications in which very low distortion
is critical. The power divider has insertion loss of less than 6.3 dB, isolation
of at least 17 dB, and input and output VSWR of less than 1.25:1. The power
divider uses SMA female connectors, measures 1.25 x 1.25 x 0.75 in., and has
an operating temperature range of -30o to +60o C. This product is available
on our E-store, AMCrf.com.
For more information please contact us at: email@example.com
About Anatech Electronics; Anatech Electronics,
Inc. (AEI) specializes in the design and manufacture of standard and custom
RF and microwave filters and other passive components and subsystems employed
in commercial, industrial, and aerospace and applications. Products are available
from an operating frequency range of 10 kHz to 30 GHz and include cavity,
ceramic, crystal, LC, and surface acoustic wave (SAW), as well as power combiners/dividers,
duplexers and diplexers, directional couplers, terminations, attenuators,
circulators, EMI filters, and lightning arrestors. The company’s custom products
and capabilities are available at
and standard products are available for purchase at the Anatech Electronics
Web store, AMCrf.com.