|More than 12,000 searchable pages indexed.|
Your RF Cafe
Airplanes and Rockets:
Check out our new Websites!
For Custom Products Our Webstore
Bandpass combiners and multiband combiners/separators are cost-effective solutions that allow carriers
operating in multiple frequency bands to multiplex both transmit and receive paths into a single antenna. The
four products below are excellent examples of such Anatech products and represent our overall capabilities for
commercial wireless and public safety wireless systems operating from VHF through microwave frequencies.
Please contact us with your requirements.
698 to 710 MHz/728 to 740 MHz Combiner
AD704-734C114 bandpass combiner has a Band 1 passband of 698 to 710 MHz and Band 2 passband of 728 to 740
MHz, with insertion loss of less than 2 dB, return loss greater than 14 dB, and power handling of 5 W CW. It
uses Type-N female connectors and measures 10.72 x 9.54 x 3.78 in.
876 to 915 MHz/1710 to 1785 MHz Multiband Combiner
AE895-1747CDB5303 multiband combiner is designed for use in GSM and UMTS applications. Its Band 1 passband
is 876 to 915 MHz and Band 2 passband is 1710 to 1785 MHz. Insertion loss is less than 0.8 dB, isolation is
greater than 95 dB, and return loss is greater than 16 dB. The combiner will handle 40 W CW and uses Type-N
GSM900/UMTS Band Combiner/Separator
AD892-1940C116 band combiner/separator is designed for 900 MHz GSM and 1710 to 2170 UMTS wireless bands.
Its Band 1 passband is 824 to 960 MHz and Band 2 passband is 1710 to 2170 MHz. Insertion loss is less than
0.25 dB and isolation and return loss are greater than 18 dB. The combiner/separator uses 7/16 DIN female
connectors and measures 5.9 1 x 2.95 x 1.77 in.