|More than 12,000 searchable pages indexed.|
Your RF Cafe
Airplanes and Rockets:
Check out our new Websites!
For Custom Products Our Webstore
Anatech Electronics' broad range of filters are designed to meet the requirements of both terrestrial and satellite communications systems, some of which are described below. In addition, we offer the industry's most sophisticated custom filter design capabilities so we can quickly meet your demands with high-performance solutions.
For more information please contact us at: firstname.lastname@example.org
1471 MHz Notch Filter
AS1471N333 is a notch (bandstop) filter with a center frequency of 1471 MHz and a notch bandwidth of 4.8
MHz. It has 35 dB of rejection at the notch, low side and high side passband insertion loss of less than 1 dB,
and uses SMA female connectors.
444 MHz Highpass Filter
AE444H9777 highpass filter has a cutoff frequency of 444 MHz, passband of 445 to 450 MHz, insertion loss
at the center frequency of less than 2 dB, and rejection greater than 30 dB from DC to 418 MHz. The filter
uses SMA female connectors and measures 2.5 x 1.12 x 0.75 in.
704 to 716 MHz Cavity Bandpass Filter
AB710B943 cavity bandpass filter has a center frequency of 710 MHz, passband of 704 to 716 MHz, passband
insertion loss of less than 2 dB, and rejection greater than 40 dB at 700 kHz from band edges. Return loss is
greater than 14 dB and power handling ability is 50 W. CW. It operates from -40 to +75° C, uses Type-N female
connectors and measures 14.96 x 5.17 x 3.78 in.