•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™

Sitemap

Hittite Press Release - March 2, 2011

Hittite's New 8 GHz Ultra-Low Phase Noise Synthesizer! -  Unsurpassed DC - 8 GHz Ultra-Low Phase Noise Synthesizer!
   Integer-N & Fractional-N Modes with Phase Noise Figure-of-Merit as low as -233 dBc/HzF


Click to visit the Hittite website

Chelmsford, MA, 03/02/2011 – Hittite Microwave Corporation, the world class supplier of completeHMC704LP4E MMIC based solutions for communication & military markets, announces the release of a new ultra-low phase noise synthesizer IC. The HMC704LP4E  has been designed for best phase noise and lowest spurious content possible in an integrated synthesizer. The HMC704LP4E is the ideal synthesizer for use in high density signal constellation applications that require excellent integrated phase noise such as microwave point-to-point radio links. The excellent performance of this product makes it ideal for use in cellular, satellite and military applications operating at frequencies up to 8 GHz, especially where ultra-low phase noise and fast frequency switching are paramount.

Hittite HMC704LP4E block diagramThe HMC704LP4E features a 4 GHz 19-bit fractional divider, 24-bit delta-sigma modulator, 14-bit reference path divider, ultra low noise phase frequency detector (PFD) and a precision controlled charge pump. The device also supports extensive access to various modes of operation via a read/write serial port. Exact frequency mode with 24-bit fractional modulator provides the ability to generate fractional frequencies with zero frequency error, an important feature for Digital Pre-Distortion (DPD) systems.

In its normal mode of operation, the HMC704LP4E floor Figure-of-Merit is -230/-227 dBc/Hz in integer and fractional modes. In a special HiK mode, these figures reach -233/-230 dBc/Hz. Phase noise is -112 dBc/Hz at 8 GHz, 50 KHz offset in fractional mode.

With common channel spacing (200 kHz, 20 kHz loop bandwidth), Spurious-Free Dynamic Range (SFDR) of 78 dB is typical. Even under worst case conditions, with the synthesizer tuned to within 20 KHz of an integer multiple of the comparison frequency, SFDR still exceeds 52 dB.

The HMC704LP4E is conveniently housed in a 4 x 4 mm RoHS compliant QFN leadless package and is specified for operation over -40 °C to +85 °C. Released data sheets may be found at www.hittite.com. Samples and evaluation PC boards are available from stock and can be ordered via the company’s e-commerce site or via direct purchase order.



About Hittite Microwave Corporation
Hittite Microwave Corporation is an innovative designer and manufacturer of high performance integrated circuits, or ICs, modules, subsystems and instrumentation for technically demanding digital, RF, microwave and millimeterwave applications covering DC to 110 GHz. The Company's standard and custom products apply analog, digital and mixed-signal semiconductor technologies, which are used in a wide variety of wireless/wired communication and sensor applications for Automotive, Broadband, Cellular Infrastructure, Fiber Optics, Microwave & Millimeterwave Communications, Military, Test & Measurement, and Space markets. The Company is headquartered in Chelmsford, Massachusetts.



Contact
Beth McGreevy
MarCom Manager
mcgreevy@hittite.com
Hittite Microwave Corporation
20 Alpha Road
Chelmsford, MA 01824
Phone: 978-250-3343
FFax: 978-250-3373
sales@hittite.com www.hittite.com








Posted  3/2/2011
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website