Z-Comm Introduces the CRO6600Z Ultra Low Phase Noise C-Band VCO
SAN
DIEGO, January 26, 2009: Z-Communications, Inc. announces a new VCO (Voltage-Controlled Oscillator) model
CRO6600Z in C-band. The CRO6600Z operates from 6590-6610 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO
features a typical phase noise of -102 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 18 MHz/V.
The CRO6600Z is designed to deliver a typical output power of 3 dBm at 5 Vdc supply while drawing 150 mA (typical,
due to the doubler) over the temperature range of 0º to 85º C. This VCO features typical 2nd harmonic suppression
of -50 dBc and comes in Z-Comm's industry standard VCO-24H package measuring 0.866 in. x 0.630 in. x 0.22 in. It
is available in tape and reel packaging for production requirements. The CRO6600Z is also ideal for automated
surface mount assembly and reflow.
CRO6600Z is well suited for microwave radio and satellite communication applications that require superior 2nd
harmonic suppression and ultra low phase noise performance. Additional specifications for this product can be
found on-line at
http://www.zcomm.com/webstore/ProductInfo.aspx?productid=CRO6600Z .
For further information on this model or any other product from Z-Communications, Inc. please contact our
Applications department via e-mail at
applications@zcomm.com or call us at 858-621-2700.
For further information on this model or any other product from Z-Communications, Inc. please contact our
Applications department via e-mail at
applications@zcomm.com or call us at 858-621-2700.
About
Z-Communications, Inc.
Z-Communications, Inc. is a pioneer in developing Voltage Controlled Oscillators (VCO) and Phase Locked Loop
(PLL) synthesizers for the commercial marketplace since 1987 and headquartered in 9939 Via Pasar, San Diego, CA
92126.
With devoted customers, Z-Communications, Inc. serves wireless and communication industries by providing the most
effective and competitively priced RF/microwave components, as well as custom component designed to meet customer
specific needs. Our sophisticated automated manufacturing facility, located in the US at our headquarters in San
Diego guarantees a high level of repeatability, reproducibility and control. For more information please visit us
at
www.zcomm.com or contact our sales department.
Posted 1/23/2009
|