|
|
Y-Lynx - Press Release 5-14-2008
|
YLX-TRM8053-025-05xIT
(PRWEB) May 14, 2008 – Y-Lynx new
wireless module YLX-TRM8053-025 is a powerful combination
of a full featured ISM band transceiver together with
an ultra flexible Communication Controller (LibIC™).
The YLX-TRM8053-025-05 is intended for low power
wireless sensor networks with an emphasis on battery
powered (down to 2.4V) applications where outstanding
battery life can be achieved if full use is made of
the Communication Controller’s power saving modes. It
is most suited for automated meter reading (AMR), home
automation, wireless sensor network as well as fleet
management.
Compact (56 x 23 x 5), this wireless
module is pre-certified to conform to ETSI regulations.
Like other members of the family, the YLX-TRM8053-025-05
offers a link budget higher than most competitors, and
even under the most demanding conditions, assures a
highly reliable radio communication and exceptional
range (in excess of several kilometers). The YLX-TRM8053-025-05
transmitter is capable of +14dBm output power at 3.3V
and a receive sensitivity down to -114dBm @ 4.8kbps
at 0.1% bit error rate.
The embedded communication
controller (LibIC™) enables multichannelized operation
for the wireless sensor network. The Y-Lynx LibIC just
about takes any low level standard data format (UART,
RS232, SPI, I2C) and handles packet/unpacket process
plus error free communication between several nodes
(Masters, Clients, Relays). Valid data is presented
to the host in any data format (RS232, USB, TCP/IP)
and also in its original form which provides a true
wireless link result.
Y-Lynx technology enables
a low cost external microcontroller to embed the only
end-user application (no RF protocol stack to develop)
About Y-Lynx
Y-Lynx provides embedded
radio communication protocol for low power wireless
links. Y-Lynx's solution enables implementation of a
reliable link for your application in a very short time
to market. Y-Lynx currently provides radio modems with
embedded firmware, integrated libraries called LibIC(TM),
firmware customization and technical support. Products
and services by Y-Lynx include RF design, communication
protocol development, and manufacturing, testing and
supporting wireless communications for embedded systems.
For more information about Y-Lynx's products contact
Y-Lynx at info@y-lynx.com or call +41 (0)24 423 92 05.
|
|
|
|
|