|
|
|
|
Linx Technologies - Press Release 9-9-2008
|
 
Another Breakthrough from
Linx Technologies
Innovative Transcoder Enables Bi-Directional
Remote Control
The revolutionary
MT Series Transcoder IC provides unprecedented features
for bi-directional remote control and command applications.
In the past, encoder and decoder ICs were commonly used
to allow the status of inputs, such as switch or button
closures, to be sent in one direction across a wireless
link. While the MT can perform these basic uni-directional
functions with ease, it also allows the bi-directional
exchange of information and reception confirmation across
an external wireless link, such as a Linx transceiver
module. When combined with external feedback, the Transcoder
can also verify that specified actions have actually
taken place. For example, a remote valve might confirm
it has fully closed, a nurse call system could indicate
“help is on the way”, or an automobile security system
would confirm it had armed and in the event of a break-in
alert the owner via their system’s keyfob. The MT is
even capable of sending variable data such as time,
temperature, pressure, or text along with control information.
The transcoder provides eight lines which can be
configured as inputs or outputs and individually set
for latched or momentary operation. Recognition of the
individual outputs can be easily defined for each device
by the manufacturer or end user. This allows the creation
of user groups, relationships, and permissions. A large
twenty-four bit address size makes transmissions highly
unique, minimizing the possibility of conflict between
multiple devices. An automatic confirmation indicates
that the transmission was successfully received. The
MT also outputs the ID of the originating transcoder
for logging or identification.
In addition to
these powerful features, a Serial Interface Engine (SIE)
allows the transcoder to be configured and controlled
from an external microcontroller or PC. Permissions
and users can be configured, modes and functions set
and external data added to the transmission stream.
A targeting feature allows commands to be directed to
specific devices.
The MT is housed in a tiny
20-pin SSOP package, and features low supply voltage,
current consumption, and selectable baud rates. Its
basic feature set is also compatible with Linx MS Series
encoder and decoder ICs. MT Transcoder ICs are available
now and priced at $2.37 in 10K volume.
For a
comprehensive look at the exciting new MT Transcoder
please visit Linx at:
www.linxtechnologies.com or call 800-736-6677.
Linx Technologies
Wireless Made Simple®
159 Ort Lane
Merlin, OR 97532
www.linxtechnologies.com |
|
|
|
|
|