•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<
Job Board
About RF Cafe™
Copyright 1999-2015

Projection for HEIGHT and CLUTTER Data files - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.

 Post subject: Projection for HEIGHT and CLUTTER Data files
Posted: Mon Feb 15, 2010 6:59 pm 

Joined: Mon Feb 15, 2010 6:46 pm
Posts: 1

I have Height and Clutter data files that have a projection that is not correct. So when I load those files along with my site files they do not match up. My sites are using NAD 27 projection (which is correct). How do I change the projections of the heights and clutters? By the way I am using Asset SW.


 Post subject: Re: Projection for HEIGHT and CLUTTER Data files
Posted: Fri Feb 26, 2010 12:49 pm 

Joined: Sat Mar 04, 2006 10:12 am
Posts: 12
Would this NADCON software be of any use to you. Is it just that your data needs to be converted to a new epoch (NAD83 vs. NAD27)?


Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website