N8300 feedback - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

gui076
 Post subject: Phase noise measurements correct ?
Posted: Tue Sep 02, 2008 6:43 am 
 
Captain

Joined: Mon May 05, 2008 9:56 am

Posts: 17

Location: France

Hello,

I have made a phase noise measure and i would like to have your advice on it.

The 1KHz measure is false because the RBW is at 1KHz so i have the filter response instead of the true measure. I'm not sure for the 1MHz measure.

 

Spec of the spectrum analyzer :

 

Thanks

Guillaume

Posted  11/12/2012