Need part value GR 1340 Pulse Generator - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

wb9jtk
 Post subject: Need part value GR 1340 Pulse Generator
Posted: Wed Jul 29, 2009 11:14 am 
 
Colonel
User avatar

Joined: Tue Dec 26, 2006 5:39 pm

Posts: 25

I have a wonderful GR 1340 pulse generator. There is one burned out resistor. I would truly love to repair this generator. A schematic would be great. However, I may be able to fix it without a schematic. If you have a GR1340 you might be able to determine the part value for me.

When manufactured, one resistor lead was not trimmed against the PCB. So here it is decades later, the resistor lead finally shorted against the chassis. The generator still generates 50% duty cycle great, but the variable duty cycle no longer works.

If you can help, I would very much appreciate it.

Posted  11/12/2012