Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Labview--image from 8753ES
Posted: Sun Nov 08, 2009 9:29 pm
Joined: Tue Nov 11, 2008 5:03 am
Location: Shanghai, China
I am trying to catch a screen short from my 8753ES to get the test logs that show the equipment setting:
center freq, span, test limit line and markers. Any one hav eexperience with this, please adviss? Appreciate!
glad to learn from you
Post subject: Re: Labview--image from 8753ES
Posted: Mon Nov 09, 2009 8:39 am
Joined: Fri Feb 17, 2006 12:07 pm
Location: London UK
I had a certain success with non-PC displays on test equipment that had no screen file builder or external interface.
I set up a digital camera on a tripod in low light conditions and no flash.
I took an exposure at 1/100 second using an Olympus camera with close-up feature. Any phot-editor software can then be used to annotate and edit the jpg that results.
It is clunky, but flexible in that the end product is an image file.
With no file builder in some older testgear, that is all you can do.
At bottom, life is all about
Sucking in and blowing out.