Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: ESD Testing
Posted: Mon May 15, 2006 12:43 pm
Joined: Mon Aug 04,
2003 10:13 am Posts: 13
Does anyone know what the most
common testing standard for ESD is? There are
references to IEC, Mil-STD, JEDEC, etc., but I
need to know in a nutshell what they are wand
when they apply. Has anyone here had experience
with ESD testing?
There are many standards for
ESD testing. I work in the military sector and
use MIL-STD-461. At the microchip level
MIL-STD-883 defines a human body test for ESD to
the chips. There are different specs and models
for the European market as well. First you
should look at your performance specification
and statement of work for your customer's
requirement. There should be a Contract Data
Requirement List (CDRL) for ESD testing
requirements. You should also check with your
Quality department to see what method and spes
A Disruptive Web Presence™
Over 10,000 pages indexed! (none duped or pirated)
RF Cafe Webmaster: Kirt Blattenberger