Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: BER on IQ transmit and reception
Posted: Thu Apr 07, 2011 7:15 am
Joined: Mon Apr 03, 2006 4:06
I would like to simply perform a BER setup when
sending a Vector (I & Q) and compare its reception in I & Q.
I am using a VSG and an VSA. On the VSG I am generating a
Matlab Vector onto RF and verify its reception on the VSA. I
then collect the I&Q of this VSA and try to compare it.
Which approach should I take?, because currently I miss
a lot of information.
Thanks for any hints
R&S RF Application Engineer