Group Delay Measurement - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Group Delay Measurement
Posted: Mon Feb 26, 2007 6:52 am
Joined: Mon Jun 06, 2005
We have measured the group delay for the
UP& DOWN converter using Network analyser. Now
we need some information about, how to interpret
the following parameters from the graph.
2. Parabolic Group Delay
If you have any detail/article reg
these kindly share with me.
More than 10,000 searchable pages indexed.
Your RF Cafe
single-handedly redefining what an engineering website should be.
Progenitor & Webmaster
(Seize the Day!)
My USAF radar shop