Custom Search
More than 8,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeView the YouTube RF Cafe Intro VideoKirt Blattenberger ... single-handedly redefining what an engineering website should be.

Carpe Diem!
(Seize the Day!)

5th MOB:
My USAF radar shop

Airplanes and Rockets:
My personal hobby website

Equine Kingdom:
My daughter Sally's horse riding website

•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™

Sitemap

### FSK ID Transmission - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

 Post subject: ### FSK ID Transmission
Posted: Sun Feb 04, 2007 4:30 pm 
 
Lieutenant

Joined: Mon Nov 06, 2006 12:15 pm
Posts: 2
Location: Presdient
Hi Folks,

We are looking at designing a radio translator and I need to know the protocol for how the FSK ID is sent. I know that the RF signal is shifted +/- to encode the data, but what is the encoding standard? I have seen "morse code" - which doesn't quite make alot of sense yet.

Is there an FCC standard or something like that that I could read. Does anyone know of an FSK ID Reciever to test the transmission?

Thanks

Steve Spano
FLE

_________________
Steve Spano
FLE
www.fl-eng.com




Posted  11/12/2012