Data Acquisition System - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Data Acquisition System
Posted: Tue Aug 31, 2010 10:15 pm
Joined: Sun Jul 11, 2010
Not sure if this is the best place
to ask this question since this is kind of 'software'
related. But since it is for an RF application and
you guys might have had experience with it, I am
hoping you can help me out.
I am just starting
out as a student and as part of my project work,
I am supposed to complete a Data Acquisition System
for a commercially available digital receiver, all
in Linux. I completed the driver development part
for the digital receiver. But I am still struggling
with the rest - the actual data acquisition program,
what do headers mean, what information they convey,
how are they supposed to be programmed, how to build
a GUI and a software scope for the data. I have
no prior experience in coding for any of these requirements.
Kindly help me out - I do not want any direct answers
or cookbook recommendations but a general direction
in which I should proceed and the concepts I need
to learn to eventually be able to complete the task.
More than 10,000 searchable pages indexed.
Your RF Cafe
single-handedly redefining what an engineering website should be.
Progenitor & Webmaster
(Seize the Day!)
My USAF radar shop