M/A-COM Tyco DR65-0003 PIN Diode Driver SPDT QTY 530 - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster


 Post subject: M/A-COM Tyco DR65-0003 PIN Diode Driver SPDT QTY 530
Posted: Mon Dec 22, 2008 1:52 pm 
 
Lieutenant

Joined: Mon Dec 22, 2008 1:41 pm
Posts: 2
Location: Fisher, IL
Image

Make an offer on the quantity you need, or the whole lot.

M/A-COM's DR65-003 is a SPDT driver used to interface between TTL logic signals and PIN diode based microwave switches. High-speed analog CMOS technology is used to achieve low power consumption at moderate speeds. Low output resistances allow it to develop high output current spikes to ensure fast switching speeds. The complementary output stages are structured so it can be used as an inverting or non-inverting driver for SPST switches, or as a single input, complementary driver for SPDT switches. The monolithic die is packaged in a SO-8, plastic surface mount package and is available in tape and reel packaging for high volume applications. The DR65-0003 is ideally suited for driving M/A-COM’s line of HMIC switches.

_________________
Brian Veeder
Praxsym, Inc. - Test & Measurement equipment





Posted  11/12/2012