Custom Search
More than 8,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeView the YouTube RF Cafe Intro VideoKirt Blattenberger ... single-handedly redefining what an engineering website should be.

Carpe Diem!
(Seize the Day!)

5th MOB:
My USAF radar shop

Airplanes and Rockets:
My personal hobby website

Equine Kingdom:
My daughter Sally's horse riding website

•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™


I have nothing to say... - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

 Post subject: I have nothing to say...
Posted: Wed Oct 01, 2003 9:28 am 
I have absolutely nothing to say about anything.

Does anyone else have nothing to say? If so, we'd like to not hear from you!


 Post subject: ...
Posted: Thu Oct 02, 2003 12:36 pm 
I have nothing to say either. Please ignore what I just said. :oops:

 Post subject: Hey!
Posted: Sat Dec 27, 2003 9:49 am 

Joined: Sat Aug 30, 2003 6:38 pm
Posts: 6
Location: City of Industry, CA
Well, it's good to not say anything again. 8)

 Post subject:
Posted: Mon Jan 05, 2004 1:54 pm 
I had something to say...
But I forgot what it was, so I'll just say nothing.

 Post subject: Dang...
Posted: Mon Jan 05, 2004 10:48 pm 
Site Admin
User avatar

Joined: Sun Aug 03, 2003 2:02 pm
Posts: 451
Location: Erie, PA
I was going to not say that! :mrgreen:

 Post subject: nothing
Posted: Mon Sep 27, 2004 11:53 pm 
nuff 8) not :roll: said :shock:

 Post subject:
Posted: Thu Oct 07, 2004 9:34 am 
Mr User...
Because you have admitted that you have nothing to say, I would be
very interested in nominating you to run for any government position.

You are obviously more honest than all politicians in the history of the U.S. of A. so far.

In what branch of government would you feel that you are best qualified to do nothing? I am sure we can raise sufficient donations to get you promptly elected as long as you promise not to say anything, and especially, to not pass any new laws.

I ask that you consider that your platform be to encourage all congressman to do nothing. As more congressman switch over to this platform, the rate of damage done by congress will continually decrease.

I am not saying thank you (because you have not yet refused the nonimation).

 Post subject: nothing and nobody
Posted: Wed Nov 10, 2004 6:36 am 
actually I took a survey and found that nobody had something to say. But user (somebody) said he has nothing to say.
Is somebody having nothing to say same as nobody has something to say? We can't say what is what because we shall not have something to say (as per the survey)
:roll: :?:

 Post subject:
Posted: Wed Nov 10, 2004 8:46 am 
8) Man, you said it!

 Post subject: (gag order)
Posted: Thu Nov 18, 2004 9:28 pm 
This is me not saying anything. :smt110

I'm holding my breath too...until the next hurry...(gasp)...

 Post subject:
Posted: Mon Nov 22, 2004 5:24 pm 

 Post subject:
Posted: Tue Nov 23, 2004 12:14 am 
Site Admin
User avatar

Joined: Sun Aug 03, 2003 2:02 pm
Posts: 451
Location: Erie, PA
rod wrote:

This post gets my vote for the best response yet!

:smt041 :smt041 :smt041 :smt041

- Kirt Blattenberger :smt024

 Post subject:
Posted: Tue Nov 30, 2004 5:20 pm 

Joined: Tue Nov 30, 2004 5:18 pm
Posts: 1
Ummm.......never mind.

Posted  11/12/2012