Bim2 Transceiver - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster


 Post subject: Bim2 Transceiver
Posted: Tue Jan 04, 2005 9:55 am 
 
Lieutenant

Joined: Tue Jan 04, 2005 9:47 am
Posts: 3
Hi,

I am using a Radiometrix Transceiver to control an Alarm System. Can any1 help me with the use of the Bim2.

I know that I have to send a preamble, followed by a start bit, then the data (Manchester Encoded), then a stop bit and CRC checksum.

I am not sure how the start and stop bits work (i.e. does the transceiver use them or does the Microcontroller that I am using have to understand them)?

If any1 has any info or advice they could offer I would be greatful.


 
   
 
 Post subject: Bim2
Posted: Tue Apr 26, 2005 6:15 am 
have a look at their control 44 mcu that is used to interface the radio.. ;-) :D




Posted  11/12/2012