Sr. Antenna Systems Engineer - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

L-3 Communications

Post subject: Sr. Antenna Systems Engineer Posted: Mon Feb 21, 2005 4:25 pm

Lieutenant

Joined: Mon Feb 21, 2005 4:20 pm

Posts: 1

Location: Greenville, Tx

Senior level Systems Engineering position for antenna/radome engineer for antenna modeling/requirements/design for aircraft and ground antenna system installations that support aircraft communications and ISR systems covering HF through millimeter wave frequencies. Required technical skills: 1. Shall have a thorough knowledge and understanding of antennas, radomes and propagation models in the frequency range HF through Ka band. 2. Shall have a detailed understanding of antenna/radome characteristics/parameters, design tradeoffs, and physical practicalities/limitations. 3. Shall have experience with computer electromagnetic models such as NEC and BSC. Shall be capable of building and verifying antenna models in CEM analysis to predict performance when installed on aircraft and in ground systems. 4. Shall be familiar with antenna range (free space outdoor and anechoic chamber) test setups for accurate measurement of antenna parameters. 5. Shall have the ability to perform RF link and budget analysis to optimize system design for sensitivity, atmospheric noise levels and dynamic range. Shall be able to derive functional requirements for components of systems to achieve specified performance. 6. Shall have effective oral and written communication skills and be able to prepare/present reports to internal and external customers.

Marty Moore

jack.m.moore@l-3com.com

_________________

Marty Moore

(903) 408-8882

jack.m.moore@l-3com.com

Posted  11/12/2012