Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Caveman Post subject: RF salaries in Australia Posted: Thu Aug 11, 2005 5:24 pm
Lieutenant
Joined: Thu Aug 11, 2005 5:16 pm Posts: 2 Location: UK I am an experienced RF design engineer and I would really appreciate some information on salaries for senior RF design posts down under. So far I have had little success in building a picture of typical salaries so it's difficult to weigh-up any job offers.
Thanks
_________________ Caveman
Top
Guest Post subject: Posted: Sun Aug 14, 2005 10:45 pm cca 80kA$ + 9% Superannuation (Pension Fund)
Top
Caveman Post subject: RF salaries in AustraliaPosted: Tue Aug 16, 2005 12:27 pm
Lieutenant
Joined: Thu Aug 11, 2005 5:16 pm Posts: 2 Location: UK Thanks for the information, it's a great help. Do you know if this varies much from state to state?
_________________ Caveman
Top
Guest Post subject: Posted: Tue Aug 16, 2005 9:22 pm Sydney pays more due to the higher living cost. However, if you are in the RF Circuit Design consider yourself lucky to find decent job anywhere in Australia.
All the best,
Rus
Posted 11/12/2012
|