RF Modeling/Measurement Position in Tampa - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: RF Modeling/Measurement Position in Tampa
Posted: Tue Aug 02, 2005 7:43 am
Aug 02, 2005 7:28 am
Location: Tampa, FL
INC., a young and visionary company that provides “best-in-class” Radio
Frequency and Microwave (RF/MW) measurements and electronic design automation
(EDA) software models, has an opening for an electrical engineer. Modelithics
produces measurement data sets and software models for RF/MW components,
subsystems, and system blocks, such as: semiconductor devices, integrated
circuits, discrete and monolithic inductors, capacitors, resistors,
amplifiers, mixers, and filters.
A minimum degree of BSEE or
MSEE (preferred) is necessary along with significant experience with
RF/Microwave measurements and model extractions for bipolar and field-effect
transistors, such as HBTs, HEMTs, MOSFETs, etc. and familiarity with
model extraction software like Agilent ICCAP. Three (3) to five (5)
years of experience in RF and microwave engineering. U.S. Citizenship
or permanent residency preferred. The Engineer will report to the Vice
President of Engineering, Other desired qualifications excellent verbal
and written communications skills, and proficiency in a variety of computer
programs, including microwave EDA software.
Submit resumes to
Please mention RF Cafe' !
Tampa, FL 33612