RF Apps Eng in NC - GSM / CDMA - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts.
Post subject: RF Design Engineer opening
Unread postPosted: Thu Apr 15, 2004 10:33 am
INCEPTION Technology Solutions, Inc. has an immediate need for an experienced RF Design Engineer for a direct hire position located in the Huntsville, AL area. Candidates should have at least five years experience designing deployed commercial microwave products at frequencies greater than 2 GHz.
-5+ years experience in designing deployed commercial microwave products at frequencies greater that 2GHz
-Capable of architecting RF subsystems based on product specifications while making tradeoffs between performance, cost, reliability, and manufacturability
-Position requires interfacing with design engineers, product management, manufacturing, test engineering, and mechanical design
-The ability to work with manufacturing during both the development and production process is essential
-Experience with Eagleware microwave design software and the ability to build and test prototype surface mount technology PC boards would be a strong plus
-Occasional travel to customer sites in the field will be required
-BSEE or equivalent required
This is an excellent opportunity with one of Huntsville's finest employers. They offer extremely competitive salaries and outstanding benefits and relocation.
For immediate consideration forward a MS Word version of your resume to Pat Kennamer at firstname.lastname@example.org