RF BTS Filter Designer wanted - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: RF BTS Filter Designer wanted Posted: Fri
Aug 12, 2005 1:05 pm
Hello, my group is presently looking for a
filter designer to aid in our development of combline and DR cavity
filters. We have a unique, proprietary, approach which already has several
potential customers banging down our door. In short, we have too much
business and can't address all of the opportunities coming our way.
As you may have guessed, I'm not a recruiter but an engineer working
in this group. We are located in the northeast and we are not a startup.
If interested, please email me at the address below.
Posted: Fri Aug 12, 2005 4:11 pm
Sun Aug 03, 2003 2:02 pm
Location: Erie, PA
Your post is a perfect candidate for the new "Hiring
Managers-to-Engineers" forum area. You might want to consider posting
it there, too.
In fact, if you find you are receiving contacts
from other than qualified engineers, moving it there could reduce the
noise. I'll be glad to remove this version of the post if you request.
Thanks for participating in the RF Cafe forums..
- Kirt Blattenberger
RF Cafe Progenitor & Webmaster
Post subject: good to knowPosted: Mon
Aug 15, 2005 1:06 am
Joined: Mon Aug 15, 2005
Thanks Kirt, I posted there too. No real bites
as of yet as this type of filter design seems to be entrenched with
old school empirical methodology.
subject: Posted: Sun Aug 26, 2007 12:21 am
Joined: Sun Aug 26, 2007 12:16 am
Location: San Clemente,
I've een designing Filters for over 27 years, pease tell me were