Hi all. I work with Panasonic Research and Development and we have a Wireless Research Laboratory
in Santa Clara, CA. We're looking for an RF Architect with specific experience in CMOS PA design.
Please see the job description below.
1. PhD degree in
Wireless Communication with 2 years of related industry work experience or equivalent experience
in CMOS PA Design.
2. Prior experiences in polar transmitter technology, transceiver
architecture definition, and simple circuit level design are desired but not required.
Strong wireless communication background. Must have in-depth knowledge in filter design, DSP
algorithm development, modulation, and demodulation techniques. Understands ISI and fading channel
conditions and design challenges. Basic understanding of information theory and coding theory.
4.Good understanding about the trade-offs between common transceiver architectures. For example,
direct-conversion, very low IF, and super-heterodyne architectures.
5. Basic understanding of
transistor models and operations.
6.Must be fluent with Matlab or Simulink. Familiar with SPW,
Verilog, Virtuoso, and AMS is a plus
7. Familiar with the operation of the test equipments,
for example, R&S CMU200, FSEA, FSIQ, and Agilent 4440
Candidates interested in this or any
position with Panasonic should register and login at the Panasonic Career Center website below:
or email me at: email@example.com
We are committed to creating a diverse work
environment and proud to be an equal opportunity employer (m/f/d/v). Pre-employment drug testing
may be required. Due to the high volume of responses, we will only be able to respond to
candidates of interest. All candidates must have valid authorization to work in the U.S. Please no
employment agency solicitations at this time. Thank you for your interest in Panasonic Corporation
of North America.Posting authorized
by Kirt B. 3/16/2009