question microstrip & cpw - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts.
Post subject: question microstrip & cpw
Unread postPosted: Fri Apr 29, 2005 7:50 pm
Joined: Fri Apr 29, 2005 7:44 pm
I've heard people refer to microstrip on a ckt that clearly has a gnd plane on the same plane as the conductor. Is there a rule of thumb gap distance from the conductor that differentiates microstrip vs cpw properties?
More than 10,000 searchable pages indexed.