Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| problem in ADS momentum - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. Fahad Post subject: problem in ADS momentum Posted: Sun Jul 31, 2005 6:54 pm Hi , i am working on a design in ADS Momentum. During meshing or Simulation i am getting warning message that "degin gemetry is coarse, please increase the layout resolution.It may cause errors". Can anybody tell me what to do to avoid this . Top pallavi_d Post subject: ADS MomentumPosted: Fri Oct 07, 2005 2:35 am Captain Joined: Thu Oct 06, 2005 3:45 am Posts: 7 Location: India Hi Fahad, I have just joined the forum and saw your query. I dont know if you have got the answer, since you had posted your query way back. I would still like to give the answer, just go to grid settings in layout editor and increase the resolution(maybe .01/0.001).Also in the X,Y settings for major grid make them 1,1. Try this out and let me know if it works. It worked for me. Regards, Pallavi Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|