Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| mixer simulation - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. Karthik Post subject: mixer simulation Posted: Mon Dec 05, 2005 4:47 pm Hi, I have been trying to simulate (as part of a down converter system) a mixer at Ku band using Ansoft Designer. I wanted to simulate the effect of the mixer phase response on the output phase of my system. Does anyone know how to model/incorporate phase information in the mixer block in Designer? I can play around with the conversion gain and the power levels in the IM products using the spur table, but how do I include phase information? Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|