Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: microwave pulling unit?
Posted: Fri Mar 12, 2010 2:03 pm
Joined: Fri Mar 12, 2010 1:57 pm
I've inherited a 'pulling unit' from Aircom on a micrwoave (2.45GHz) test bench.
It doesn't work as I had guessed; I move the plunger (> 1 wavelength) and very little happens to the frequency spectrum or reflected power. Any suggestions are welcome - I'm not much of an microwave engineer.