Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| microwave office 2001 - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. the french student Post subject: microwave office 2001 Unread postPosted: Thu Apr 28, 2005 5:15 am Hello, I 'd like some advice on microwave office 2001. I realised some em structures, simulated them and now I need to print a mask in order to engrave my circuit but I don't find the option to do it. When I print (or print view), it gives me an idea of my circuit's aspect but not with the right dimensions. Does someone know how I can print it precisely because a soft like Corell draw isn't enought accurate and not adapted to my application. Thanks Steven Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|