•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<
Job Board
About RF Cafe™
Copyright 1999-2015

how to design harmonic mixer - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.

Post subject: how to design harmonic mixer Posted: Wed Jul 11, 2007 5:17 am


Joined: Wed Dec 13, 2006 8:57 pm
Posts: 1
how to?


Post subject: Posted: Mon Jul 23, 2007 11:02 am


Joined: Fri Feb 17, 2006 12:07 pm
Posts: 218
Location: London UK
Most of the recent design descriptions seem to be on pay-per-view university and patent research sites.
However, Microwave Journal January 2000 published a design that is fairly well described in some detail, for K band. Paper by Matjaz Vidmar.
I Googled under "anti-parallel" and "mixer" and found a few useful descriptions.
The Radio Society of GB published a design attributed to a Russian designer, but I cannot remember when exactly. This was the same as the MWJ one in Fig 2 "conventional design".
Good luck

Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website