•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™

Sitemap

discrete PA - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.


Tom
Post subject: discrete PA
Unread postPosted: Thu Mar 24, 2005 4:33 pm

Hi, I need to design a discrete PA circuit. Band: PCS1900(1850 to 1910MHz), power 5W, Vcc=6V. GSM input signal

Can any of you suggest a transistor supplier that supplies transistors which can handle these requirement?

Regards,
Tom


Top


Joe
Post subject: power amp
Unread postPosted: Fri Mar 25, 2005 11:57 am

Try Eudyna

http://www.us.eudyna.com/products/MW.htm

or APT

http://www.advancedpower.com/Products/R ... fault.aspx

These two should cover most applications. You may need to use a higher power device at lower voltage to meet your requirements.


Top


Guest
Post subject:
Unread postPosted: Fri Mar 25, 2005 12:57 pm

Joe,
Thanks for the information, and I will look into them.

Regards,
Tom




Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website