digital display for magnetic field - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

pratapkollu

Post subject: digital display for magnetic field Posted: Sat Mar 10, 2007 10:38 am

Lieutenant

Joined: Sat Mar 10, 2007 10:32 am

Posts: 3

Dear Members

I designed a magnetic sensor for navigation purpose(2d-compass). The output of the sensor is in form of analog voltage . I want to add a digital display(for displaying corresponding magnetic field). The sensor output for zero magnetic field is zero volts, so now it must show zero Oersteds in digital display. One more example: if magnetic field is 1 Oe, output voltage is 10V, Now I want 1 Oe digital display instead of 10 V analog output.

If any one has idea about this module please do help me

Thanks and regards

Pratap

--------------------

PRATAP.KOLLU, Ph.D. Scholar

Division of Materials Science and Engineering,

Engineering building # 1

Chungnam National University(CNU),

220 Gung-dong, Yuseong-gu, Daejeon 305-764,South Korea.

Phone :+82-42-8216227,

Top

IR

Post subject: Posted: Fri Mar 23, 2007 7:07 pm

Site Admin

Joined: Mon Jun 27, 2005 2:02 pm

Posts: 373

Location: Germany

As a starting point you will definitely need an ADC (Analog to Digital Converter)

Posted  11/12/2012