Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
pratapkollu Post subject: digital display for magnetic field Posted: Sat Mar 10, 2007 10:38 am
Lieutenant
Joined: Sat Mar 10, 2007 10:32 am Posts: 3 Dear Members I designed a magnetic sensor for navigation purpose(2d-compass). The output of the sensor is in form of analog voltage . I want to add a digital display(for displaying corresponding magnetic field). The sensor output for zero magnetic field is zero volts, so now it must show zero Oersteds in digital display. One more example: if magnetic field is 1 Oe, output voltage is 10V, Now I want 1 Oe digital display instead of 10 V analog output. If any one has idea about this module please do help me Thanks and regards Pratap
-------------------- PRATAP.KOLLU, Ph.D. Scholar Division of Materials Science and Engineering, Engineering building # 1 Chungnam National University(CNU), 220 Gung-dong, Yuseong-gu, Daejeon 305-764,South Korea. Phone :+82-42-8216227,
Top
IR Post subject: Posted: Fri Mar 23, 2007 7:07 pm
Site Admin
Joined: Mon Jun 27, 2005 2:02 pm Posts: 373 Location: Germany As a starting point you will definitely need an ADC (Analog to Digital Converter)
Posted 11/12/2012
|