Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: balun help Posted: Wed May 16, 2007 9:05 am
Joined: Tue May 02, 2006 4:59 am
I intend to design and build impedance matching
balun for my
class AB push pull amplifier.
the details are :
impedance ration 1:9 , freq range : 100-500MHz, power handling :25W.
I read alot of articles ( SEVICK) but unfortunately I cant find
good prcticle considerations for balun 1:9
As i understand transmission
line (twisted pair) implementation is good for wideband balun.
It will be very helpful if someone has good tips for me.