Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| Zero IF Mixer Simulation - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. Guest_Can Post subject: Zero IF Mixer Simulation Unread postPosted: Sat Jan 29, 2005 8:02 pm Hi All, I was just wondering that anybody has an idea about how to simulate Zero-IF Mixer (RF-LO= 0Hz) using ADS or some other software. I tried my with ADS but it is unable to do harmonic balance simulation for this kind of mixer. I am using behavioral model from the ADS system's library. Or is it possible to get these results by using Simulink. I am really stuck at this point , so any help will be greatly appreciated. N.B: i noticed in this forum there are quite smart guys, so i can hope for the best. Regards, Tony Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|