Which point can it be chosen for the Class E Amp in IV curve - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts.
Post subject: Which point can it be chosen for the Class E Amp in IV curve
Unread postPosted: Tue Apr 27, 2004 4:38 pm
The first problem is that.
I couldn't find anything through some books.
I just know class e amps have good efficiency coz of the switching operation. But How can I choose the operation point?
And if you know how to handle the simulation transient in ADS, could you tell me how I can check the siganl flow of input and outpit?
I am so desperate.
Unread postPosted: Wed Apr 28, 2004 3:17 pm
Joined: Sun Aug 03, 2003 2:02 pm
Location: Erie, PA
I just got the April 2004 edition of "RF Design" magazine, and there happens to be an article titled "Broadband Monolithic S-Band Class-E Power Amplifier Design." I have not read the article, but it does have a chart with load lines on it, so maybe you'll find something useful there.
The RF Design website (www.rfdesign.com) still has the March issue up, but April should be online soon, in case you do not have access to a hard copy.
- Kirt B. :mrgreen:
More than 10,000 searchable pages indexed.