Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: USB and RS 485 Programming
Unread postPosted: Tue Mar 09, 2004 12:12 pm
Joined: Tue Mar 09, 2004 12:08 pm
I am a design Engineer at a small start up firm. I know and have programmed serial
Rs-232 devices. Now, I have to program a small pump which is 485 based. Further, I would like to use multi-drop as
next project I know involves using, X-Y-Z stages along with the pump to create a robotic machine. Any
samples or tips on using RS485 pgms will be helpful.
subject: USB and RS 485 Programming
Unread postPosted: Tue Mar 09, 2004 8:49 pm
Welcome to forum!
I read your information with interest. Below please, click on this link. I thought it might help you.