Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Stacking RF boards - connector choice ?
Unread postPosted: Thu Aug 26, 2004 10:34 am
Hi Cafe visitors,
I would like to have an RF module plugged into a mainboard with some coax connectors F<= 2GHz. What do you think is the best choice (best=cheapest.....).
I am thinking along the lines of MCX or MMCX, or even the new MMBX.
I think MCX is still the cheapest.
Any ideas ?
Unread postPosted: Thu Aug 26, 2004 12:26 pm
I concur with your decision. Those connectors have been fielded successfully in millions of products. Just be sure to choose a vendor that can supply the quality that your application requires. Not all connectors are created equal.
Post subject: RF PCB Connectors..
Unread postPosted: Thu Sep 09, 2004 2:10 pm
I used some SMB style connectors from
telegartner a few years back. They were nice
and had a swivel that made registration a breeze.
In quantity, they weren't too bad on the price, about a buck.