Spectre Simulation - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

RF-Ban

Post subject: Spectre Simulation

Unread postPosted: Wed May 11, 2005 5:10 am

Offline

Captain

Joined: Sat Feb 26, 2005 5:24 pm

Posts: 16

Location: Lille, FRANCE

Hello every body i have a simple question,

About using spectre (schematic composer) to simulate a coax cable what would be the best tline? mtline? another one? and for mtline how to get R values from an attenuation versus frequency table, in fact using the datasheet of the cable.

Franck

Posted  11/12/2012