Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Resize a microwave oven
Posted: Thu Apr 21, 2011 7:04 pm
Joined: Thu Apr 21, 2011 3:42 pm
I'm looking for ways to re-size a microwave oven (similar to a commercial domestic MW
oven) for some food processing applications.
Assume: rectangular waveguide (a=9.5 cm, b=
5.5 cm); incident frequency: 2.45 GHz.
Suppose we fix two dimensions of the cavity and
modify the length. The objective is to have minimum power reflection though the port (S11) so that
maximum energy efficiency can be obtained. If we use RF calculator, we can have various cut-off
frequencies depending on the modes. What should be the guidelines (cut-off frequency, modes etc)
so that we can achieve the design objectives?
Thanks and regards,