RF Connectors - RF Cafe Forums


•−• ••−• −•−• •− ••−• • RF Cafe Morse Code >Hear It<
Job Board
About RF Cafe©
RF Cafe E-Mail

Product & Service Directory		Engineering Jobs
Personally Selected Manufacturers		Employers Only (no recruiters)

RFID CARD / JAMMER OR BLOCKER - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.

Kerrveball12

Post subject: RF Connectors

Posted: Mon Jun 15, 2009 11:42 am

Lieutenant

Joined: Mon Jun 15, 2009 11:39 am
Posts: 1

I was wondering if anyone has any information on this question.

I need the smallest connector available for RF. It will be a board-to-board connection and the specs are below:

DC - 3 GHz
positive retention (SMA has a screw to retain the connection)

Any information will help.

Richard

Post subject: Re: RF Connectors

Posted: Mon Jun 15, 2009 10:16 pm

Captain

Joined: Mon Jun 12, 2006 9:16 am
Posts: 5

Is this a case where the two PCBs mate to each other through a connector rather than use a cable?

Do you want a screw connection, or a push-on?

shen.lance

Post subject: Re: RF Connectors

Posted: Tue Jun 23, 2009 5:33 am

Lieutenant

Joined: Sun Jun 21, 2009 8:34 am
Posts: 1

Board to Board connector use Coaxial? I have no seen that. Maybe some Board to Board series such JAE's (A Japanese Co.) products will satisfy your requirement.

bhawkins

Post subject: Re: RF Connectors

Posted: Mon Jul 20, 2009 8:26 am

Captain

Joined: Sun Feb 15, 2009 9:54 pm
Posts: 7

maybe mmcx is best for you? or ssmc? maybe mini smp? you can see some sizes @ my website @ www.fairviewmicrowave.com. though other suppliers have larger selctions of mmcx & ssmc's

bob hawkins

nubbage

Post subject: Re: RF Connectors

Posted: Tue Jul 21, 2009 9:18 am

General

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 218
Location: London UK

once upon a time Sealectro made a slide-in slide out-out miniature coaxial connector with berylium copper finger-stock. Not sure if it went up to 3GHz, but for sure up to 1Ghz min. Anyways, maybe H&S regs killed it off due to hazardous material restrictions.

_________________
At bottom, life is all about
Sucking in and blowing out.

raghavkapur

Post subject: Re: RF Connectors

Posted: Wed Apr 04, 2012 7:38 am

Captain

Joined: Mon Aug 09, 2010 5:44 am
Posts: 9

You could try looking for the RF Connectors you need on everything RF http://www.everythingrf.com/rf-microwave-connectors

There are thousands of connectors listed from multiple manufacturers, and you an narrow down by specification.

alex113

Post subject: Re: RF Connectors

Posted: Thu May 24, 2012 10:21 am

Lieutenant

Joined: Thu May 24, 2012 10:11 am
Posts: 1

I would try this item 901-9877-RFX.

Posted 11/12/2012

RF Cafe Software

RF Cascade Workbook

RF system analysis including
frequency conversion & filters

Smith Chart™ for Excel
Smith Chart™ for Visio
RF & EE Symbols Word
RF Stencils for Visio

A Disruptive Web Presence™

Custom Search

Over 9,000 pages indexed!

Read About RF Cafe
Webmaster: Kirt Blattenberger
KB3UON

Product & Service Directory
Personally Selected Manufacturers

RF Cafe T-Shirts & Mugs
Calculator Workbook
RF Workbench