Question about µWave's fcmax - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Question about µWave's fcmax
Posted: Thu Jan 06, 2011 9:39 pm
Joined: Thu Jan 06, 2011
When I simulate a combline fiter in µWave
freqency=20ghz, errors occurred and information
displayed as below:
ERROR 1: Internal error
in project [Combline.circuit_1]: Error for structure
spres_31: critical order is exceeded by 166.66666667%
INFO in project [Combline.circuit_1]: Structure
can be analyzed up to fcmax = 12.00000GHz
1: Internal error in project [Combline.circuit_1]:
*==> Execution Terminated!
ERROR 1: Internal
error in project [Combline.circuit_1]: Error in
subroutine destroy_qres: unable to (de)allocate
Program terminated with an error! ---Error
occurred at f=1.800000 GHz [1.point]! Calculation
In order to get precise results,
how can I modify the "fcmax" ?
Thanks in advance!
More than 10,000 searchable pages indexed.
Your RF Cafe
single-handedly redefining what an engineering website should be.
Progenitor & Webmaster
(Seize the Day!)
My USAF radar shop