Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
amit Post subject: Noise Calculation in AWR MicrowaveOffice Posted: Mon Jan 23, 2006 4:40 pm hi, have anyone idea regd. noise analysis in AWR Microwaveoffice ?
I mean to say which type of noises it takes into account for MOSFETs ??
Top
IR Post subject: Posted: Mon Jan 23, 2006 4:57 pm
Site Admin
Joined: Mon Jun 27, 2005 2:02 pm Posts: 373 Location: Germany Hello amit,
You can consider Flicker noise (1/f).
_________________ Best regards,
- IR
Top
Guest Post subject: Posted: Tue Jan 24, 2006 12:30 am only Filcker ?
What abt. thermal and gate induced and others ??
Top
IR Post subject: Posted: Tue Jan 24, 2006 2:09 pm
Site Admin
Joined: Mon Jun 27, 2005 2:02 pm Posts: 373 Location: Germany Noise sources are part of the MOSFET model that you use to simulate your device behavior. Flicker noise is being used in many models available by the manufacturers, while other sources are not so commonly used. Of course that If you have a model, which provides more than flicker noise then it is the best!
_________________ Best regards,
- IR
Posted 11/12/2012
|