Need small RF screened box with hinged lid for radio testing - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

Sylvanius

Post subject: Need small RF screened box with hinged lid for radio testing

Unread postPosted: Fri Jan 21, 2005 4:56 am

Can anyone suggest where I may purchase an RF screened enclosure with the following basic spec:-

Screening at 1GHz better than 60 dB

Access to box via hinged door.

At least one RF feed into box (Any type: BNC, N, SMC ETC)

Size to be big enough to fit mobile phone size equipment in

Thanks in advance

Top

Kirt Blattenberger

Post subject: ETS-Lindgren

Unread postPosted: Fri Jan 21, 2005 9:33 am

Offline

Site Admin

User avatar

Joined: Sun Aug 03, 2003 2:02 pm

Posts: 308

Location: Erie, PA

Greetings Sylvanius:

You might want to take a look at ETS-Lindgren -

https://www.ets-lindgren.com/product_Res ... 0Standards

Agilent used to make a couple models, but I don't know if they make them any more.

Edited 1/21/2005 @ 8:58 AM:

I just checked and Agilent still makes the TS-50 RF test enclosure. I have used it a couple times and it is very good.

https://cp.literature.agilent.com/litweb ... -6858E.pdf

- Kirt Blattenberger :smt024

Top

Profile

Sylvarnius

Post subject: Thanks

Unread postPosted: Fri Jan 21, 2005 11:08 am

Thanks for info lance

Posted  11/12/2012